When do you need a fall arrest system - how far up do you have to be?
Rules and regulations?

Our ABS Planning Aid shows you how to correctly position your fall arrest system. (The images below are solely intended as a visualization aid)

ABS Safety plant Ihre Absturzsicherung
Absturzgefährderter Bereich zur Absturzkante auf Dach

Fall danger zone close to the edge of a structure

A fall danger zone is any area where a access or work route comes within 2 m of the edge of a structure. It is mandatory to provide a fall arrest solution for all employees working within this zone. The edge may be the edge of a roof but could also be the edge of a domed rooflight or a smoke and heat extraction system. In accordance with DIN 4426, an access route on a roof surface must be accordingly secured as soon as the potential fall distance exceeds 1 meter, in as far as this access route is located within a fall danger zone. If the roof pitch is greater than 20 degrees, care should be taken to ensure that a permanent fall arrest system is installed. Please find below a list of the most important provisions dealing with the topic of fall arrest and rope protection:

  • ASR A2.1 “Protection against falls and falling objects, entering hazardous areas”
  • DGUV Principle 312-906 “Selection, training and certification of specialists for personal fall protection equipment”
  • DGUV Publication 201-056 “Basic planning guidelines for anchorage devices on roofs”
  • DGUV Rule 112-198 “The use of personal fall protection equipment”
  • DIN 4426 “Equipment for building maintenance - safety requirements for workplaces and accesses - design and execution"

Should ABS Safety take on the job of planning your individual fall arrest systems, we will, of course, keep an eye on all the respective rules and regulations. Our experienced team would be happy to help: Click here to contact our ABS Service Team

Beispiel permanente Absturzsicherung auf Flachdach durch Seilsicherungssystem

Planning example: Advantages of an ABS Safety lifeline system

Anchorage points are generally installed at points outside the actual fall danger zone. A lifeline system, on the other hand, allows you to get much nearer to the edge as you are permanently secured.

The most dangerous spots are always the outer corners where the swinging motion resulting from a fall is at its greatest (the diagonal distance to the corner is larger than the distance to the edge).

Should I use a lifeline system or a system of single anchorage points?

Whether you decide on an ABS Safety fall protection solution based on a series of single anchorage points (SAP) or on one of our flexible ABS-Lock SYS lifeline systems depends on how you intend to use your system. The basic rule is:

If it is only very rarely necessary to access your roof surface, a single anchorage point solution in combination with a temporary lifeline system is often perfectly adequate. However, if you need to regularly access your roof - or if your roof surface is slippery (e.g. metal or PVC surface with a pitch of 4-5° or more), it is advisable - maybe even crucial - to install a lifeline system.

Beispiel Anschlagpunktverteilung zur Absturzsicherung auf Flachdach

Anchorage points should be positioned in the high-danger corner areas

In straight sections, the length of your lanyard is what determines exactly how far you should place your ABS anchorage points from the edge. The lanyard can be accordingly adjusted and shortened to the required length. This means that the anchorage points do not necessarily always have to be the same distance from the edge/edge of the roof.

The first thing to do when planning a fall arrest system is, therefore, to ensure that high-danger corners are equipped with suitable anchorage devices. Each of these corner areas is secured using a single anchorage point. The remaining stretch is then divided into sections of max. 7.5 meters.

Beispiel Positionierung Anschlagpunkte für Seilsicherungssystem auf 4m Gebäude

Flat roof 4 meters up - optimally secured using a lifeline system

In this example, the lifeline system is installed as a retention system. It is not merely intended to arrest possible falls but to prevent them from happening in the first place. A correctly adjusted lanyard prevents the user from accidentally stepping over the edge.

Our ABS Safety lifeline systems offer you a broad selection of temporary and permanent solutions.

Beispiel Positionierung Anschlagpunkte für Seilsicherungssystem auf 10m Gebäude

Building height 10 meters - one central anchorage point serving as a fall arrest system

In the illustrated example above, a single ABS-Lock anchorage point is located 4.5 meters from the edge of the roof.

A user standing at one of the corners will swing a maximum of 1.86 meters if he/she falls. Even when allowing for different body sizes and how much the energy absorber stretches in the case of a fall, the remaining distance to the ground is more than adequate, i.e. the free fall distance is sufficient to prevent an impact.

How to calculate the fall distance

When calculating the fall distance, different factors need to be taken into account: Example: An individual who is 1.80 meters tall falls over an edge. He/she is attached to 2 meters of slack or swinging rope using a standard ABS Safety lanyard equipped with an energy absorber. Through the fall, this connector is stretched an additional 1 meter.

We are now talking about a total possible fall distance of 5.80 meters. It is crucial to take considerations such as the amount of energy absorber stretch into account when installing your anchorage devices in order to ensure the best possible protection from the lethal impact of a fall.

ABS Safety plant Ihre Absturzsicherung

We are there to help you plan the perfect fall arrest solution

Please feel free to contact us! Our Sales & Engineering Team is happy to provide you with all the help and advice you need to plan the perfect fall arrest solution.

Our consulting services are based on a wealth of expertise which allows us to put together a combination of anchorage points, lifeline systems, guardrails, PPE equipment etc. superbly tailored to the specific needs of your project.