bookmark_borderbookmark

ABS Lanyard

Sharp edge-texted lanyard with energy absorber and carabiner hook
Grafik eines Verbindungsmittel mit fester Länge, das zur PSAgA zählt.
Bild eines Verbindungsmittels zur Absturzsicherung mit alternativem Rohrhaken zum Anleinen.
Die größere Öffnung des ABS Lanyard mit Rohrhaken erlaubt den Einsatz an Rohren, Handläufen und ähnlichen tragfähigen Anschlagmöglichkeiten.
ABS Lanyard attached to an ABS horizontal lifeline system

Product information ABS Lanyard

This sharp edge-tested lanyard (in accordance with EN 35´4:2010), which is equipped with an energy absorber (in line with EN 355:2002) and 2 carabiner hooks, is based on a robust kernmantle cable. It is available in three set lengths: 1 m, 1.5 m and 2 m.

  • EN 354:2010 & EN 355:2002
  • Sharp edge-tested kernmantle cable (Ø 12 mm)
  • Incl. 2 carabiners and energy absorber
  • Lengths: 1 m, 1.5 m, 2 m
  • The 1.5 m and 2 m models can also be supplied with a pipe hook
Max. no. of users
Certification

Find out more about our ABS Lanyard

Are you looking for a standard lanyard in a set length? Then add an ABS Lanyard to your PPE kit.

Our ABS Lanyard has a set length and stands for exceptional rope-up protection according to EN 354. This durable, high-quality, sharp edge-tested kernmantle cable offers you reliable protection for many years, if appropriately cared for and serviced. One end of the lanyard is equipped with a textile energy absorber (EN 355). If the secured individual steps over the edge and falls, the energy absorber arrests the fall by stretching to a strictly pre-defined extent,  thus reducing the ensuing force.

Roofers, workers at heights, maintenance and cleaning personnel can set up a strong connection between themselves and the respective anchor using the robust carabiner hooks at each end of the lanyard. Our ABS Lanyard can be used in combination with a single anchorage point, a lifeline system or a rail guard system. This arresting cable is typically red and is available in 3 set lengths: Choose between our 1, 1.5 and 2 m models.

Upon request, we can also supply our ABS Lanyard 1.5 and 2 m models with a larger pipe hook. This can then be used as a connector on scaffolding - in fact, anywhere, where a pipe or similarly-dimensioned anchorage option offers your PPE a sufficient load-bearing capacity.

Did you know: For long-term usage, your lanyards and other protection equipment must be regularly inspecting by a qualified PPE inspector. This inspector can recognise defects and provide you with the required seal of approval, with details of the next inspection due date, once your protection equipment has passed the examination. Such inspections are required by law at least once a year. Without these inspections, your lanyard may only be used for a maximum of twelve months after the respective purchase date (in as far as the product does not show any other signs of damage or similar defects).

We would be happy to provide you with more information on this subject and take care of the maintenance of your protection equipment - simply contact us!

keyboard_arrow_up