ABS-Lock DH05
Anchorage point + ladder hook - screwed onto a beam through over-rafter insulation

Product information ABS-Lock DH05

Thanks to its special base plate, this stainless steel roof safety hook can be flexibly adjusted to fit the angle of your roof surface. The cranked shaft is designed to bridge the battens. It is installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the beam below.

  • Roof safety hook in accordance with EN 517:2006, type B
  • Anchorage point + ladder hook
  • Designed for load-bearing wooden structures
  • Base plate allows flexible installation
  • Simply screw it onto a wooden beam (also suitable for over-rafter insulation)
  • Min. beam dimensions: 60 mm x 120 mm
Force Directions
Max. no. of users

Find out more about our ABS-Lock DH05 Fits in perfectly: Roof safety hook (type B) for flexible installation on a tiled roof surface

The base plate with its 2 x 7 pre-drilled holes guarantees flexible installation. This roof hook is simply attached to a load-bearing beam using 2 screws - allowing you to perfectly align it to the angle of your roof tiling. The two screws needed to install the device are included in the package.

Our whole range of ABS Safety roof safety hooks has been certified for all directions of load according to EN 517:2006, type B. In practice, this means that our roof hooks are more user-friendly than most as they can be used from any point on the roof surface (except for axial loads). In addition, we have subjected our ABS-Lock DH05 to a range of inhouse fall tests - simulating the conditions when the device is simultenaously used by 3 individuals. Our roof hook mastered these load tests perfectly.

Our ABS-Lock DH05 anchorage point is manufactured completely from stainless steel. You can also hook a ladder onto it. If you want to be really safe when using this roof hook, you also need a safety harness and a lanyard with an integrated energy absorber.

Related products

Image showing an ABS-Lock DH04-OG roof safety hook

Anchorage point + ladder hook in one - screwed onto a beam through over-rafter insulation

Image showing our stainless steel roof safety hook with its anchorage eyelet and ladder hook

Anchorage point + ladder hook in one - simply screwed onto a beam through the insulation

Unobtrusive anchorage point with ETA - designed for screwing into a wooden beam