bookmark_borderbookmark

ABS-Lock X-H-14+2

Anchorage point - designed for screwing onto wooden panelling and beams
Image showing an ABS-Lock X-H-14+2 fall arrest anchor - screwed onto a wooden surface using 14 short and 2 long screws
Presenting our ABS-Lock X-H-14+2 anchorage point in moving images: Watch our short product video to find out more about its most important features!
Image showing an ABS-Lock X-H-14+2 anchor reinforced with a supporting tube
Simply add a supporting tube to our ABS-Lock X-H-14+2 anchorage point to use it as an intermediate or end bracket in a lifeline system on a wooden structure

Product information ABS-Lock X-H-14+2

Once attached to a beam using the 2 long screws provided - with the 14 smaller ones screwed straight into the wooden panelling - this stainless steel anchorage point (Ø 16 mm) and its base plate (200 x 200 mm) reliably protect roof workers & Co. from falling. This device was awarded national technical approval by the German Institute for Construction Technology (DIBt).

  • National technical approval ("abZ"): Z-14.9-688
    (pls. observe the installation instructions provided in the "abZ")
  • EN 795:2012, A + CEN/TS 16415:2017
  • abZ: Wood min. 24mm
  • EN 795: Wood min. 24mm
  • Incl. installation set
  • Add a supporting tube for usage as an end or corner post in a lifeline system
Force Directions
Substructure
Max. no. of users
Miscellaneous
Attachment
Application

Find out more about our ABS-Lock X-H-14+2

Fall arrest device for installation on wooden panels

Our ABS-Lock X-H-14+2 single anchorage point for wooden panels with a depth of 24 mm and upwards can be used by up to 3 individuals as a retention or arresting system. This anchor was specially designed to buckle under a lateral load and is installed on the floor. The main anchor component is a rod (Ø 16 mm) which buckles when subjected to the force of a fall in order to reduce the leverage effect. As a result, the force actually exerted on the subsurface is minimal and can be easily absorbed.

Our ABS-Lock X-H-14+2 anchor is installed using 16 stainless steel screws: The 14 shorter screws are screwed into the wooden panelling. The two longer screws need to be screwed into a load-bearing beam. Add one of our special ABS-Lock X supporting tubes to upgrade your anchor for use in a lifeline system.

During roof work, your workers can attach themselves securely to the anchorage point using suitable personal fall protection equipment (first and foremost through the use of a safety harness combined with a self-retracting lifeline). If you want to find out which is the best choice of equipment for your own needs, then please contact us. Click here for a list of ABS contacts.

Accessories / Components

Sealant collar for fall protection anchors installed on a bitumen roof surface (Ø 16 und 42 mm)

bookmark_borderbookmark

Sealant collar for anchorage points (Ø 16 and 42 mm) - specially designed for PVC, PP and PE roof surfaces

bookmark_borderbookmark

Thermal protective cover & signal rod for fall protection anchors

bookmark_borderbookmark

Stainless steel reinforcement for ABS-Lock X anchorage points

bookmark_borderbookmark
keyboard_arrow_up