bookmark_borderbookmark

ABS-Lock X-H-24

Anchorage point - designed for screwing onto a wooden surface
Grafik des Anschlagpunktes ABS-Lock X-H-24 mit runder Grundplatte für Holz.
Der Anschlagpunkt ABS-Lock X-H-24 in Bewegung: Schauen Sie sich das kurze Produktvideo mit den wichtigsten Features an!
Grafik des ABS-Lock X-H-24, direkt auf der Holzschalung montiert.
Direkt auf der Holzschalung verschraubt, schützt der Anschlagpunkt ABS-Lock X-H-24 zuverlässig vor einem Absturz.
Grafik eines durch Bitumen im Holz verschraubten Anschlagpunktes des Typs ABS-Lock X-H-24.
Der Sekurant ABS-Lock X-H-24 kann auch durch die Bitumenbahn im Holzuntergrund verschraubt werden.

Product information ABS-Lock X-H-24

The round base plate (Ø 400 mm) of this stainless steel anchorage point (Ø 16 mm) guarantees that any force exerted on it is optimally distributed across a thin installation surface. Our standard package includes 24 stainless screws which are used to attach the device to an OSB / wooden surface.

  • EN 795:2012, A + CEN/TS 16415:2013
  • OSB min. 12 mm
  • Wood min. 18 mm
  • Can also be installed on a vapour barrier or waterproofing (max. 15 mm)
  • Optimal force distribution through the round base plate design
  • Incl. installation set
Application
Substructure
Force Directions
Max. no. of users
Certification
Attachment
ABS-Lock SYS

Find out more about our ABS-Lock X-H-24

Stainless steel anchorage point with a round base plate for thin surfaces

An anchorage point for 3 individuals which still does its job perfectly even when installed in OSB (oriented strand) boards that are merely 12 mm thick? No problem for our ABS-Lock X-H-24 – thanks to its special base plate geometry. Due to its symmetrical design, the force (of a fall) is optimally distributed – irrespective of the direction of load. This anchorage device can also be screwed onto waterproofing, a vapour barrier or thermal insulation with a maximum depth of 15 mm.

This anchorage point, which is manufactured completely from stainless steel, is simply screwed onto an OSB surface or wooden panelling using 24 screws. Wooden subsurfaces, however, must be at least 18 mm thick. In the case of a fall, the anchor buckles to a pre-defined degree, thus minimizing the force exerted on the subsurface.

Make sure you only use your anchorage point in combination with suitable personal fall protection equipment (PPE). Your PPE should include a force-absorbing lanyard to reduce the force exerted on the user’s body and protect him/her from serious injury. Click here for more information on ABS Safety’s range of matching PPE equipment.

Related products

Anchorage point - designed for screwing onto wooden panelling

bookmark_borderbookmark

Anchorage point - designed for screwing onto wooden panelling and beams

bookmark_borderbookmark

Anchorage point - designed for screwing onto a wooden beam

bookmark_borderbookmark

Accessories / Components

PPE set for roofers, incl. safety harness, guided type fall arrest, tape sling and protective bag

bookmark_borderbookmark

Easy-to-wear safety harness for continuous usage when working high up

bookmark_borderbookmark
keyboard_arrow_up