bookmark_borderbookmark

ABS-LockSeal Plastic

Sealant collar for anchorage points (Ø 16 and 42 mm) - specially designed for PVC, PP and PE roof surfaces

Product information ABS-LockSeal Plastic

Use one of these sealant collars to seal up an anchorage point installed on a PVC, PP or PE roof surface. This seal solution is suitable for Ø 16 and 42 mm posts. The disc is 220 mm in diameter. Shrink tubing is included in the package.

  • Suitable for PVC, PP and PE roof surfaces
  • Specially designed for Ø 16 mm and Ø 42 mm posts
  • Shrink tubing included
  • Disc diameter Ø 22 cm

Find out more about our ABS-LockSeal Plastic

ABS-LockSeal Plastic - the right sealant collar for your plastic roof surface

Whether you have a PVC, PP or PE roof surface - our ABS-LockSeal Plastic solution offers you a reliable way of sealing up a braod range of synthetic roof membranes supplied by different manufacturers. The disc of this high-quality sealant collar is 220 mm in diameter and is simply fused onto the roof membrane. Shrink tubing is then placed around the shaft of the collar to finish off the sealing up process - simply cover up the rim of the collar and shaft of the anchor or lifeline system support and then heat the shrink tubing up from top to bottom so that it shrinks to provide a watertight finish.

Our ABS-LockSeal Plastic can be used for 16 mm rods as well as for 42 mm reinforced supports. There are 3 models to choose from - for PVC, PP and PE membranes. These can be used to seal up anchorage systems installed on many different types of roof membrane supplied by numerous maufacturers. Please refer to our "Compatibility ABS-LockSeal" notes for a detailed list.

Do you need an extra-long sealant collar? No problem! We also supply an ABS-LockSeal Extension which is available in three different lengths: 300, 600 and even 1200 mm.

Our product portfolio also includes our ABS-LockSeal XL Plastic model. This is an extra-long collar manufactured from one single piece of material which can be shortened on the spot to the required length. A series of notches placed at 20 mm intervals show where to cut for a neat, straight edge.

Accessories / Components

Shrink tubing (Ø 16 and Ø 42 mm) - designed to extend a sealant collar

bookmark_borderbookmark
keyboard_arrow_up