ABS-Lock DH06 Fall Protection Anchor Metal Roof | clamped
- Roof safety hook in accordance with EN 517:2006, type B
- Anchorage point for PPE + ladder hook
- For stainless steel ≥ 0.5mm; steel and titanium zinc ≥ 0.6mm; aluminum ≥ 0.7mm
- Simple installation using just 4 bolts
- No roof penetration required
- Designed for rounded-edge and standing edge roofs
- Installation materials included
Product description ABS-Lock DH06
Simply clamped into place: Roof safety hook for metal seam roofs
A roof safety hook installed without roof penetration? Our ABS-Lock DH06 does the job. Simply clamp the device to the seam of your rounded-edge or standing edge seam roof. As the system is attached directly to a seam, you can install it totally independently from the distance between the individual profiles. Our ABS-Lock DH06 is designed to secure 1 individual from deadly falls. In addition, our roof safety hook, which has been certified in accordance with EN 517:2006, type B, also serves as a ladder hook.
The clamping profile of the roof safety hook is placed on top of a seam and then secured using 4 nuts and bolts (50 Nm). Our ABS-Lock DH06 can be installed on stainless and galvanized steel seam roofs ≥ 0.5 mm. Roof sheeting made of copper or titanium zinc must be at least 0.6 mm thick. Aluminum roofs must have a depth of at least 0.7 mm.
Our ABS-Lock DH06 is manufactured from high-quality stainless steel and can be used and accessed from all sides. In the case of a fall, the amount of force exerted on the substructure is relatively small due to the extremely low device height. To prevent a fall, the roof safety hook should be implemented as a retention system whenever possible. Your lanyard, which is part of your personal protective kit (PPE), should be adjusted and shortened accordingly.