ABS-Lock X-T-21
Anchorage point for installation on a warm roof using toggle bolts

Image showing a stainless steel ABS-Lock X-T-21 anchor for warm roofs - designed with pre-drilled holes at different intervals for more flexibility

Image showing a reinforced ABS-Lock X-T-21-SR anchorage point for trapezoidal sheeting

Presenting our ABS-Lock X-T-21 anchorage point in moving images: Watch our short product video to find out more about its most important features!

Our ABS-Lock X-T-21-SR anchor can be used to set up a lifeline system once fitted with a special supporting tube

Product information Downloads section Downloads section

Product information ABS-Lock X-T-21

This stainless steel anchorage point (Ø 16mm) and base plate (290 x 200 mm) were developed for usage on a warm roof. The anchor is easily installed from above using the 4 specially prepared toggle bolts included in the package.

National technical approval ("abZ"): Z-14.9-688
(pls. observe the installation instructions provided in the "abZ")
EN 795:2012, A + CEN/TS 16415:2013
Trapezoidal sheeting, steel ≥ 0.63 mm
Warm roofs, distance between the bores: 180 to 250 mm
incl. specially prepared toggle bolts
Add a supporting tube for usage as an end or corner post in a lifeline system

Substructure

Trapezoidal Sheeting

Application

Profile Roof
Flat Roofs

Attachment

Toggle bolts

Certification

DIBt Approval | Ü-Sign
EN 795

Force Directions

Lateral

Max. no. of users

3 Persons

ABS-Lock SYS

HLL Intermediate
End and corner support

Miscellaneous

Stainless Steel

Find out more about our ABS-Lock X-T-21 Easy-to-install anchor for warm roofs

Our ABS-Lock X-T-21 considerably reduces the amount of effort required to install your fall arrest system. This anchor comes with 4 specially prepared toggle bolts which are simply inserted one by one through the holes in the base plate (290 x 200 mm). This fall arrest device for warm roofs provides 3 individuals with a reliable anchorage option and doubles up as a retention and fall arrest system.

The ABS-Lock X-T-21 anchorage eyelet - manufactured completely from stainless steel - can also be deployed as an intermediate post in a lifeline system. To use this device as an end terminal or corner element, simply reinforce it with a matching supporting tube.

Our stainless steel anchorage point sits on top of a rod (Ø 16 mm) designed to buckle under stress. It is suitable for both positive and negative trapezoidal sheeting systems. The system has been tested for lateral loads and was specially devised for warm roofs. Use this anchorage point in combination with our matching personal fall protection equipment (PPE).